Office: 01202 065 747
Sales Hours
Mon - Fri: 08:00 - 16:30
Adress
Unit 1 Sovereign Business Park
Willis Way
BH15 3TB Poole
Factory: 123-456-789
Sales Hours
Mon - Fri: 09:00AM - 09:00PM
Saturday: 09:00AM - 07:00PM
Sunday: Closed
Adress
1840 E Garvey Ave South West Covina, CA 91791
English
FSM-020-230vM5
Overview
Multi-Zone Fan Status Monitor board enables independent, remote monitoring of up to five EC fans, connected either in Standard (common speed control signal for each fan) or Multi-Zone (independent speed control signal for each fan) configuration and equipped with an ‘open collector type’ tachometer . The fan fault signal is generated when the speed of any active fan, in two consecutive measurements, falls below the minimum or exceeds the maximum speed value. These minimum and maximum values are pre-set programmatically and saved to the non-volatile memory. The general fault condition is indicated by the volt-free relay contacts and the fan alarm LED. In addition, the fan failure is indicated by the corresponding fan status LED indicator.Features
- Plug and play installation.
- 5 independent fan speed control inputs.
- 'True' fan failure alarm indication.
- Normally close and normally open volt free alarm signal.
- System status indication LED's.
- PC communication.
Application
- Residential HVAC Installations.
- Industrial HVAC Installations.
Technical data
-
Product IDST-FSM-020-230vM5
-
TypeFan Status Monitor
-
Supply Voltage230Vac
-
Modbus CommunicationNo
-
Fan Speed Control Inputs / Outputs5 / 0
-
Fan Speed Control Signal0 - 10Vdc
-
Fan Tachometer Inputs5
-
Fan Enable RelayYes
-
Fan Enable Relay Contacts Rating230Vac / 10A
-
Fan Alarm Signal OutputNormally Open / Normally Close
-
Fan Alarm Signal Output Contacts Rating230Vac / 10A
-
MountingSurface
-
Dimensions100x80x35mm (WxLxD)